T150Z thermostatic electric shower

Specification

Temperature Control - Thermostatic

Power Ratings - 8.5kW, 9.5kW

Inlet Connection - 15mm compression

Water Entry Points - Top, bottom, back (right hand side unit)

Cable Entry Points - Top, bottom, back (right hand side unit)

Outlet Connection - 1/2" BSP

Plumbing System - Cold water only

Minimum Running Pressure / Flow - 0.5 Bar @ 8l/min*

Maximum Static Pressure - 10 Bar

Surface Mounted Only

Approvals - BEAB Care, CE, BKM

Guarantee - 2 years

*Recommended minimum running pressure/flow for full performance 1 Bar @ 8 l/min

Features

Thermostatic temperature control – constantly regulated temperature provides safer showering for all the family. Endorsed by Beab Care for extra assurance

Adjustable timed shutdown – set the shower to automatically shutdown after a pre-selected time

Installation set maximum temperature stop – reduces the risk of accidentally turning the temperature too high

Phased Shutdown – when the shower is turned off, the water continues to run for a few seconds to flush out preheated water before stopping completely

Large start/stop button – for easy selection of your favourite shower setting every time

Low pressure indicator – operates when the water pressure is insufficient

Stylish riser rail kit and double interlocking hose

Rub Clean Showerhead – 5 spray patterns

Power rating - 8.5kW

Provision for connecting to a level access waste pump making installation even easier and working as part of a wetroom solution