Riba Electric Shower
SKU
Riba Electric Shower
The Riba Electric Shower has minimalist styling with pleasing clean lines.
Features
Riba has minimalist styling with pleasing clean lines, and just two simple control knobs.
- 'Power on’ indicator
- Separate power and temperature control dials
- Rub clean shower head – Single spray pattern
- Will replace - Passion, T70SI, T80SI, Biarritz 2, Belize, Desire, Enchant, Marbella, Zante, Aquatronic 2 Plus, Aquatronic 3 (not including Aquatronic 3 Ultra), Agio, Aspirante Electric, Colourwave Electric
Efficient A energy rating
Temperature Control and Flow Performance
Temperature Control
Stabilised
Power Ratings
8.5kW; 9.5kW; 10.5kW
Safety
Low Pressure Indicator
No
Controls
Start/Stop Button
No
Push Button Power Control
No
Temperature Control
Yes
Shower Fittings
Number of Showerhead Spray Patterns
1
Shower Head Diameter
70mm / 2.76 inches
Rub Clean Nozzles
Yes
Rail Diameter
19mm / 0.75inches
Rail Length
530mm / 20.87inches
Distance Between Rail Brackets
530mm / 20.87inches
Shower Head Holder Mechanism
Twist and Lock
Soap Dish
No
Hose Length
1m
Hose Retainer
Yes
Hose Material
Double Interlocked Stainless Steel
Colours Available
White/chrome
Finish
Finish
White
Guarantee and Approvals
Guarantee
2 years
Approvals
BEAB, CE, BSI Kitemark
Installation
Plumbing System
Cold Mains
Water Entry Points
Left Hand Side - Top, Bottom, Back : Right Hand Side - Bottom, Back
Cable Entry Points
Left Hand Side - Top, Bottom, Back : Right Hand Side - Bottom, Back
Outlet Connection
1/2" BSP male thread
Minimum Running Pressure / Flow
1 Bar @ 8 l/min
Maximum Static Pressure
10 Bar
Product Notes
Attributes
Warranty, efficiency & safety
Riba Electric Shower Spares
- Power Neon (from 2011)
- Thermal Cut Out & Screw Assembly
- Microswitch and Wire Assembly (from 2011)
- Heater Can Assembly (from 2011)
- Stabiliser Valve Assembly
- Solenoid Valve Assembly
- Outlet Pipe and Pressure Relief Device (from 2011)
- Pressure Relief Device (PRD)
- Terminal Block and Wires (from 2011)
- Cover Assembly
- Insert Trim - Cover
- Insert Trim - Backplate














